OBS

 

Setup Guide

 

OBS is free, open-source software for live streaming. Here's a guide for how to set it up to optimize your broadcast for gaming and other uses. 

1. Install OBS on your computer:

  • Download for PC / Mac
  • Follow the prompts to install
  • Open OBS

 

2. Setup your scene, by adding a camera and any other content

  • Click the + icon under Sources
  • To add a Camera, choose "Video Capture Device", the "Add New"
  • To capture a Game, choose "Game Capture"
  • To capture your Desktop, choose "Display Capture"
  • Drag and drop your video sources to arrange them how you please

image1.pngimage4.png

 

3. Setup your video quality

  • Open the OBS settings
  • Go to the "Output" tab
  • Set Video Rate to 2500 Kbps

Screen_Shot_2019-07-03_at_12.42.21_PM.png

  • Go to the "Video" tab
  • Set Recommended Canvas Resolution - Default (should be the same as your computer monitor)
  • Recommended Output Resolution - 1280x720
  • Recommended Frame Rate - 30

Screen_Shot_2019-07-03_at_12.42.41_PM.png

  • To stream at higher quality, see the FAQs below

 

4. Setup your broadcast

  • Visit younow.com and click Go Live in the header, and choose OBS
  • Do the normal broadcast setup (tag, title, etc)
  • On the broadcast preview page, copy the stream key and return to OBS

image2.pngimage5.png

 

 

5. Configure OBS

Note: If you're missing YouNow from the list, please see this two articles for PC / Mac

 

  • Click Settings and go to the Stream tab
  • Tap the Service drop down

Screen_Shot_2019-07-03_at_12.40.08_PM.png

 

  • Click Show All...

Screen_Shot_2019-07-03_at_10.40.02_AM.png

  • Select YouNow

mceclip0.png

  • Paste the Stream Key that you copied from YouNow

Screen_Shot_2019-07-03_at_12.41.04_PM.png

  • Close the settings
  • You only need to do this setup once, the first time you use OBS

 

6. Go Live

  • In OBS, click the Start Streaming button
  • Return to YouNow
  • You should now see a preview of your stream
  • Click Go Live to begin your broadcast
  • You are now live!
  • Note: If you want to guest while using OBS, you need to setup your audio to avoid feedback. See the guide here.

 

Common Setup Issues

Q: Did you follow the steps in the correct order?

A: For OBS streaming to work, you must do everything in the correct order. First, setup your broadcast on YouNow. Second, start streaming from OBS. Third, hit Go Live on YouNow.

 

Q: Did you take a long time to configure OBS?

A: If so, your broadcast may have timed out. Cancel it and start a fresh one. Try to start streaming from OBS shortly after setting up the broadcast to avoid this.

 

Q: Is your camera being used by another application?

A: OBS will not be able to access your camera if it is being used by another application, such as your browser. Close all other programs that may have your camera, and try restarting OBS. 

 

FAQs

Q: Can I guest while using OBS?

A: Yes. But because OBS captures your computer audio, you need to take some steps to prevent your guests from hearing themselves.

The simplest option is to mute Desktop Audio while guesting. In OBS, click the speaker icon next to Desktop Audio in the mixer (bottom center).

The more advanced and permanent option is to split your computer's audio, so that OBS does not capture and rebroadcast your guest's audio. Follow the guide here.

 

Q: Can I stream at higher quality?

Yes. The recommended settings above give the most reliable viewing experience, but you can stream at higher quality if you want. Just keep in mind that at higher bitrates, some viewers may not have sufficient internet capacity to view your stream smoothly. Settings to use:

  • 1280x720 @ 30fps = 2500kbps
  • 1280x720 @ 60fps = 3000kbps
  • 1920x1080 @ 30fps = 5000kbps
  • 1920x1080 @ 60fps = 6000kbps

 

Q: Why does my video appear laggy?

A: On YouNow, a preview of your video is shown. It may appear slightly delayed because it is coming from an external source (OBS). But this will not impact the quality of the broadcast.

 

Q: How do I use scenes?

A: OBS allows you to setup multiple scenes, and quickly switch between them. This allows a broadcaster to use different layouts for different occasions, or show an image while they are away from their computer. For a detailed guide on OBS scenes, go here.

 

Setup OBS Audio for Guesting

When you use OBS, your computer's audio is captured and shared in your broadcast. This creates problems when you guest, because your guests will hear themselves. To avoid this problem, you need to install a special tool that lets you choose which individual applications are captured and broadcast by OBS.

1. Download and install VB-Audio Virtual Cable

  • Download from here
  • You might need to right-click and "Run as administrator"
  • After installing, you should see Virtual Cable as an Output Device in the Sound preferences. If not, try restarting your computer after installation.

2. Set Virtual Cable as your default sound output

  • Right click on the audio icon in the taskbar (bottom-right corner) and choose "Sounds"

0_aOcvHfsLHMIgZTYG.png

  • On the Playback tab, find the Virtual Cable
  • Right click on it and choose "Set as default device"

0_VPzRohJ9LDf9AZeN.png

3. Send Virtual Cable output to your speakers

  • Go to the "Recording" tab of the Sounds preferences
  • Double click on the Virtual Cable to open it's Properties

0_CWH6oVZtQ5Q-5PU7.png

  • Go to the"Listen" tab
  • Click the "Listen to this device" checkbox & select your headset/speakers

0_NSrmI5rL1vEiBvQe.png

4. Exclude your Web Browser from Virtual Cable (send it directly to your speakers)

  • Right click on the audio icon in the taskbar (bottom-right) & choose "Open Sound settings"

ximg_5afded3c1bfca.png.pagespeed.gp_jp_jw_pj_ws_js_rj_rp_rw_ri_cp_md.ic.qVNp246N9w.png

  • Scroll to the "Other Sound Options" section
  • Click the "App Volume And Device Preferences" option

ximg_5afded1d95932.png.pagespeed.gp_jp_jw_pj_ws_js_rj_rp_rw_ri_cp_md.ic.oR4HpPT-Ub.png

  • Find Google Chrome in the list of apps, and select your speakers as the output

ximg_5afdedf27d0b3.png.pagespeed.gp_jp_jw_pj_ws_js_rj_rp_rw_ri_cp_md.ic.eLkQla4vPN.png

5. Choose Virtual Cable as the desktop audio in OBS

  • In OBS, open the settings and go to Audio
  • Choose Virtual Cable as Desktop Audio Device

0_3fXW-J2zbhqDfT-K.png

 

 

Uninstall my old OBS

  1. On your computer, make sure all hidden files and folders are not hidden. Open File Explorer from the taskbar.
  2. Select View > Options > Change folder and search options. Select the View tab and, in Advanced settings, select Show hidden files, folders, and drives and OK.
  3. Uninstall OBS from your computer
  4. Open your computer's start menu and scroll down to letter O. If you still see OBS instances, right-click > More > Open file location
  5. Delete the whole OBS folder from the location
  6. Then go to Local Disk C > Users > Your name or computer name > App data > Roaming
  7. Delete the folder called obs-studio
  8. Clear your Recycle bin
  9. Download the newest OBS version from their official site https://obsproject.com/
  10. Install the version on your computer and start it
  11. Configure OBS like shown in this guide: https://younow.zendesk.com/hc/en-us/articles/206439166-OBS-Setup-Guide
  12. Start streaming

 

For best help and results, users must contact support@younow.com